ANCEL S2000 Car Smoke Detector Air Leakage Analyzer Fuel Tank Leaking EVAP Gas Leak Locator Motor SUV ATVs Diagnostic Tool
$216.51
- Product Code: 1005003468731671
- Availability: In Stock
- Weight: 2kg
ANCEL S2000 Car Smoke Leak Locator Exhaust System Analyzer Inspection Trucks Fuel Tank EVAP Gas Leakage Detector Motor SUV ATVs
ANCEL S2000 car smoke leak detector is a professional auto pipe leak detect tool. It will help us locate cars, motorcycles,trucks, ATVs leakage on the pipe systems quickly and exactly. And also diagnose the tightness of doors and windows.You can use it everywhere you wanted.
Wide Range Of Applications
For Detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats, suitable for all car models
ANCEL S2000 Advanced Technology Diagnose System
➤Crankcase System Test: excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.
➤Intake System Test: leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power.
➤Car Sealing Test: poor air tightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof , etc.
➤Fuel Tank System Test: possible reasons for the leakage of the fuel tank system: 1. There are gaps in the fuel tank and pipeline caused by improper installation. 2. The fuel tank cover is not sealed enough
➤Turbo Test: the leakage of coolant would cause the engine to report high water temperature.
➤Various Pipe Fittings Test: automobile pipes can be classified according to their functions: brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses.
➤EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling
➤Exhaust System Test: Un-purified harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.
Product Specifications, Comparing With Each Other
Independent Switch Control Design
✅AIR MODE
Independent controlled built-in air pump
✅SMOKE MODE
Independent controlled smoke generator
Overheat & Anti-frost Protection
➤Overheat Protection
When the temperature of the device exceeds 75℃, Power protection will be intelligently activated to turn it off
➤Anti-frost Protection
The device can also work normally at -20℃
Leak Status Indication
1.When you use this ANCEL S2000 car smoke leak detector for the first time, fill with 10-20 ml oil.Please be careful NOT to beyond this range.
2.The testing liquid: both liquid paraffin and baby oil are OK.
3.Fresh oil can be filled with only when the smoke gets thin, and it can't be filled over 20 ml each time.
4.Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
5. During the process of leak detection, please keep away from smoke-sensitive parts.
6. Do NOT run the detector over 8 minutes continuously. It needs interval rest.
7. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
8.The round part of this detector has temperature, please be careful to avoid burns.
9. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
How To Do Leakage Test
1. Fill 20 ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover.
2. Disconnect the pipe that needs to be connected with detector.
3. Connect detector with DC 12V battery, turn on the power switch, and the detector starts to work.
4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points.
Noted: Please use head lamp if necessary.
QUICKLY DETECT LEAKS
NO Leak: When the value of the pressure gauge remains unchanged, it means that there is no leakage in the system.
Small Leak: When the value of the pressure gauge drops, it indicates a small leak in the system.
Massive Leak: When the value of the pressure gauge reaches zero, it indicates a large leak in the system.
Noticed
The whole operation need to turn off your vehicle
Product Structure And Specifications
Main Unit Dimensions: 180* 130*86 mm
Package Weight: 2240 g
Output Pressure: 0.5-0.8 Bar
Output Flow: 6L/Min
Air pressure Output: Built-in Air Pump
Power Supply: DC 12V Battery
ANCEL S2000 Diagnostic Leak Detector Package List
1*Car Smoke Leak Detector
1*Carton
1*Intake Bladder
1*Smoke Delivery Hose
1*Adapter Cone
1*Intake Bladder Replacement Rubber
1*Power Cord
1*Funnel
1*Hook up
1*Manual in English
