ANCEL S1000 Car Smoke Leak Detector Tool Trucks EVAP Gas Exhaust Cooling System Inspection Smog Analyzer Motor SUV ATVs Test
ANCEL S1000 car smoke leak detector is a professional auto pipe leak detect tool. It will help us locate cars, motorcycles,trucks, ATVs leakage on the pipe systems quickly and exactly. And also diagnose the tightness of doors and windows.You can use it everywhere you wanted.
ANCEL S1000 Advanced Technology Diagnose System
➤Intake System Test
➤Car Sealing Test
➤Fuel Tank System Test
➤EVAP System Test
➤Exhaust System Test
Wide Range Of Applications
For Detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats, suitable for all car models
Overheat & Anti-frost Protection
When the temperature of the device exceeds 75℃, Power protection will be intelligently activated to turn it off
The device can also work normally at -20℃
How To Do Car Pipes Smoke Leakage Test
1. Fill 20 ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover.
2. Disconnect the pipe that needs to be connected with detector.
3. Connect detector with DC 12V battery, turn on the power switch, and the detector starts to work.
4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points.
Noted: Please use head lamp if necessary.
Leak Status Indication
1.When you use this ANCEL S1000 car smoke leak detector for the first time, fill with 10-20 ml oil.Please be careful NOT to beyond this range.
2.The testing liquid: both liquid paraffin and baby oil are OK.
3.Fresh oil can be filled with only when the smoke gets thin, and it can't be filled over 20 ml each time.
4.Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
5. During the process of leak detection, please keep away from smoke-sensitive parts.
6. Do NOT run the detector over 8 minutes continuously. It needs interval rest.
7. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
8.The round part of this detector has temperature, please be careful to avoid burns.
9. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
The whole operation need to turn off your vehicle
Product Structure And Specifications
Main Unit Dimensions: 180* 130*86 mm
Output Flow: 6L/Min
Power Supply: 12V Automobile Battery 6Amp
Output Pressure: 0.5-0.8 Bar
Length Of Power Cord: 2.5 Meters
Length of Smoke Cord: 2.5 Meters
Package Weight: 2240 g
ANCEL S1000 Product Details
ANCEL S1000 Diagnostic Leak Detector Package List
1*Car Smoke Leak Detector
1*Smoke Delivery Hose
1*Intake Bladder Replacement Rubber