ANCEL FX2000 scan tool is an enhanced version of the general code reader. It has strong vehicle coverage of over 46 vehicle makers(1996 US-based, 2002 EU-based, 2005 Asian-based, or newer OBD II & CAN domestic or import vehicles). It does not only work on the Engine system for full OBDII diagnosis but also supports comprehensive diagnosis on the ABS, SRS, Transmission system. Moreover, it also provides a live data stream for these 4 ECUs, allows you to add 4 parameters in the meantime to show the live data in a graph intuitively, which is intended to help you quickly find potential problems of the vehicle. This OBD2 scan tool is a must-have and an excellent choice for mechanics.
Car Four System Diagnose Tool:
1. Read fault codes for the check engine light, both generic and manufacturer specific codes
2. Erase fault codes
3. Read live data stream
4. Retrieve vehicle information (VIN)
Engine System Diagnosis:
Quickly determines the cause of faults on the Engine system, reads current, permanent, and pending codes and clears the codes, and turns off the warning light. What's more, the FX2000 also shows critical OBD II extended data, such as fuel, emissions data, and other real-time manufacturer-specific parameters for making sure the engine ECU works correctly and safely.
Auto Transmission System (AT) Diagnosis:
Reads and clears error codes, views live data (Clutch engagement, fluid temperature, pressure, etc.) in the transmission system, keeps its output optimally adapting to the speed and load of the vehicle. It provides detailed TCM data on the vehicle, which helps you find existing or potential issues fast and accurately.
ABS (Anti-lock Braking System) Diagnosis:
Reads and clears error codes in the ABS and turns off the warning light. It retrieves ABS fault codes to tell you where the fault is with a visual inspection of all brake components. The FX2000 also performs live data flow that allows the user to monitor and diagnose the ABS to ensure that repairs to this vital system are effective and complete.
SRS (Airbag) Diagnosis:
FX2000 code reader has the capability to read and clear fault code in the SRS (Airbag) and turn off the warning light to ensure that it is working correctly and safely. This diagnostic tool also displays a graph live data stream of the Supplementary Restraint System (airbag) which helps you analyze and check if the airbag system works fine.
Live Data Stream Graph Analysis
Full OBD II modes
Read and clear fault codes, turn-off malfunction indicator light (MIL)
O2 sensor test to check fuel efficiency and vehicle emission
Display freeze frame data and retrieve vehicle information(VIN, CIN, and CVN)
EVAP test for fuel tank system (Carbon canister test)
Read dynamic live datastream, able to store and playback
Display I/M readiness status (Non-continuously monitored system test )
Advanced On-board monitoring test
Built-in DTC lookup library, read generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes, show definition
Support lifetime free upgrade online via a PC
How to update the FX2000?
Update this scan tool via USB cable or TF card, here's the upgrade guide via USB cable following.
Step 1: Before starting the upgrade, please connect this device to a computer via the USB cable, and make the network connection stable. (It supports WIN XP, 7, 8, 10 operating systems.)
Step 2: Download the update software from ANCEL official website (refer to the manual) and install it on a PC.
Step 3: Open the software tool, select the connection mode “USB” and click “OK” to continue. The "Product Serial Number" will be read automatically, then hit “Device Upgrade”.
Step 4: Move to the register page, type your email address and Register Code will be read automatically, then hit “Submit”.
Step 5: Click “Select All” and click “Download” to start downloading.
Step 6: When the 2 progress bars reach 100%, the upgrade completes. Click “Quit” and disconnect the USB cable.
Please Note:
If the screen freezes during the upgrade progress, please disconnect the USB cable, and try it again.
Please download the upgrade guide named “Installation Manual [PDF]” in the “Technical Specification” part on the product description page.
How to check if the FX2000 has installed the latest software?
Connect the FX2000 to a computer and open the update tool. If the local version is the same as the latest version, it has installed the latest version of the software.
How to print data?
The software tool supports WIN XP, 7, 8, 10 operating systems, follow these steps to print:
Make sure the "Record Mode" is ON before you start to diagnose cars;
After the diagnosis completes, connect the FX2000 to a PC via a USB cable, open the installed software tool and click "Print Manager" to the Scan Print page;
Enter the FX2000 menu "Diagnose" - "Review"- "Upload Record" to upload the data to the software tool;
Finally you can save or print out the data.
What will you get?
1x FX2000 OBD2 Scanner, 1x OBD2 Cable, 1x USB Cable, 1x TF Card (16GB, it’s put into the device), 1x TF Card Adapter, 1x User Manual, 1x Update Guide