ANCEL DP500 Cluster Calibriation Key Programmer Immobilizer Key Programming OBD2 Scanner 11 Reset Car DiagnosticTools

Car Diagnose&Key Programming&Instrument Cluster All IN ONE

ANCEL DP500 OBD2 Automotive Scanner Instrument Cluster Key Programming All in ONE with 11 Reset Service OBD2 Automotive Tools

Professional Mileage Adjust Master

Read ODO
Write ODO
Read Flash
Write Flash
Read EEPROM

ANCEL DP500 Key Programming Function

Add/Erase Keys
All Key Lost Programming
Programming Remote
Key Numbers Reading
Reading Pin Code
Reading EEPROM Chip
Remote Matching
Reset ECM

ANCEL DP500 OBD 2 Scanner Support 11 Special Functions

✅Oil Reset Service
The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset the mileage or driving time to zero after the maintenance,so the maintenance light will go out and the system will start a new maintenance cycle.

✅ABS Bleeding
When the ABS contain air,the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.If the ABS computer,ABS pump,brake master cylinder,brake cylinder,brake line,or brake fluid is replaced,the ABS bleeding function must be performed.

✅Gear Learning

✅CVT Reset

✅Battery Match
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery,in which the original low battery fault information will be cleared and battery matching will be done.

✅EPB Adaption

✅TPS Adaption

✅Steering Angle Reset
To reset the steering angle,first find the relative zero point position for the car to drive in straight line.Taking this position as reference,the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor ,replacing steering mechanical parts(such as steering gearbox,steering column,end tie rod,steering knuckle),performing four-wheel alignment,or recovering car body,you must reset the steering angle.

✅DPF Regeneration
DPF Regeneration is used to clear PM(Particulate Matter)from the DPF filter through continuous combustion oxidation mode(such us high temperature heating conbustion,fuel additive or catalyst reduce PM ignition conbustion)to stabilize the filter perfornance.

✅Injector Coding
Writing injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity.After the ECU or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that cylinder can better indentify injectors to accurately control fuel injection.

✅Suspension Matching
This function can adjust the height of the body.When replacing the body height sensor in the air suspension system,or coontrol module or when the vehicle level is incorrect,you need to perform this function to adjust the body height sensor for level calibration.

ANCEL DP500 Car Diagnostic Tools Supports 8 Languages

English/Spanish/French/Polish/Portuguese/Italian/German/Russian

Note:If you need to open a language other than English, please provide the serial number to the customer service after receiving the product, and the customer service will open it for you

ANCEL DP500 Supports One Key Upgrade Via WiFi

DP500 Support multiple models

ANCEL DP500 Product Parameters

Operation System: Android 5.1.1
CPU: RK3128 Quad-core, ARM Cortex A7@1.2Ghz
Battery: 3800mA, rechargeable polymer lithium battery
Extension memory card: 32G Micro SD (TF) card supported
Storage capacity: 16GB
LCD：7 inch
LCD resolution: 800*480
Touch screen: capacitive touch screen
Wifi: supported
Working temperature: -20℃～55℃（14℉～131℉）
Storage temperature: -20℃～70℃（-4℉～158℉）
Weight: 850g
Dimension: 214*133*28mm
Package Size: 388*120*298mm
Package Weight: 3.0kg